Applications of the MAGpro Panel - MAGpro Insulated Panel Systems Inc.

Get in touch with us
2 March 2014
Category
Blog
Comments 0

Tags , , , , , , , , ,

Residential Foundations

  1. Suitable for Conventional or “Walk Out” basement Applications
  2. Concrete floors and footings or screw pile footings with PWF grade beam and PWF sleeper floors may be utilized
  3. Walls have far superior thermal resistance vs concrete
  4. No Need for Interior Frost Wall Means a more spacious basement
  5. Windows of All Sizes Can Be Installed
  6. 45″ wide windows are easiest to install
  7. Electrical Chases are two ft on center
  8. Conventional Weeping Tile Systems and Foundation Wrap or Peel and Stick Damp proofing Systems Can Be Utilized
  9. No Special back Fill Requirement. Back Fill after Slab and Main floor are installed.
  10. Backfill up to 8 ft is standard on 8 ft or 9 ft walls, higher backfills can be engineered.
  11. Materials can be easily transported to Remote Building Sites
  12. Highly Advantageous for Winter Construction – Less Hoarding and heating. Faster lock Up
  13. Footings must be smooth and level.
  14. Walls fit directly over the pressure treated base plate.
  15. Walls are connected efficiently to each other using 2 x 8 splines, top plates, foam adhesive, and corrosion resistant fasteners.
  16. Conventional engineered main floor systems are used.
  17. In most cases, foundation walls can be fabricated and erected by a four person crew in less than one day!

 

Residential exterior walls

  1. Come in various thicknesses. Most commonly 6 5/8″ thick or 8 ¼” thick
  2. Provide non combustible surface on both interior and exterior of wall
  3. Solid construction results in fewer thermal breaks
  4. Will Accommodate any size of windows or doors
  5. 45″ wide windows are easiest to install
  6. Can be interior finished with mud and tape, drywall, or a textured finished
  7. Can be easilty exterior finished with battons, paint, stucco, or siding
  8. Walls will stop fires from spreading from interior to exterior and exterior to interior

 

Residential Interior walls

  1. Highly impact resistant
  2. Can be used a load bearing wall
  3. Will contain a fire in a room longer

 

Residential Roof

  1. Results in spacious vaulted ceiling
  2. R-27 value or higher
  3. Provides Superior fire protection

 

Commercial Applications

  1. faster than framing
  2. eliminates steel stud framing, insulating, and vapour barrier.
  3. Strong fire protection and ability to prevent fire spread

Fence and Retaining Wall

  1. pre-fabricated for quick and easy installation
  2. various heights, thicknesses and style options available
  3. versatile finishing – apply paint, stucco, brick or stone veneer with confidence
  4. excellent pull-out, adhesion and structural load strength
  5. guaranteed to withstand wind load
  6. strong enough to support large gates, heavier finishing and retaining wall loads
  7. excellent sound barrier
  8. durable, impact resistant and will not rot
  9. panels are non combustible, highly flame resistant
  10. straight, plumb fence line every time

Leave a Reply

Call Us at +1 403 404 7881

Get in touch with us